Powersoft T604 DSP+Dante Digital Amplifier 4 Channel

Description

Powersoft T604 DSP+Dante Digital Amplifier
The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

Features
The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
Full control with a PC running Armonía. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
Group controllable advanced EQ with raised cosine filters
Large preset library
Preset compatibility with X Series
Very long FIR filters (42.6 ms)
Control and monitoring through ArmoníaPlus
Technical Data
Number of channels: 4
Output power: Single channel mode: 2 Ω: 1500W; 4 Ω: 1500W; 8 Ω: 1250W
Output power: Bridge mode: 4 Ω: 3000W; 8 Ω: 3000W
Power supply: Universal, regulated switch mode
Nominal power requirement: 100-240 V ±10%, 50-60 Hz
Operating voltage: 90 V – 264 V
Gain: 32dB
Input sensitivity: 2.57 Vrms
Max input level: 24 dBu
Frequency response: 20 Hz – 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio: > 110 dB (20 Hz – 20 kHz, A weighted)
Crosstalk separation: < -70 dB @ 1kHz
THD+N: < 0.1% (typical < 0.5%)
IMD: < 0.1% (typical < 0.5%)
Input impedance: 20 kΩ balanced
AD Converter: 24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range – 0.005% THD+N
DA Converter: 224 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range – 0.003% THD+N
Memory/presets: 256 MB (RAM) plus 512 MB flash for presets /
Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Delay: 2 s (input) + 100 ms (output) for time alignment
Limiters: TruePower™, RMS voltage, RMS current, Peak limiter
Damping control: Active DampingControl™ and LiveImpedance™ measurement
AC main: 1x IEC C20 connector – 20 A max (region-specific power cord provided)
Audio signal input: 4x XLR – Signal input
Loudspeakers: 2x speakON – Neutrik NL4MD
Network/data: 1x Rj45 socket – RS485 data connection (non-DSP version), 1x Rj45 socket – DANTE®
Dimensions (L x H x W): 484×44.5x405mm
Weight:7.5 kg

Output power
Single-channel mode
2 Ω – 1500 W
4 Ω – 1500 W
8 Ω – 1250 W
Bridge mode
4 Ω – 3000W
8 Ω – 3000W