Features
\nPower supply<\/p>\n
Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
\n Patented output filter with ripple cancellation network
\n Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
\n Detachable AC mains cable with IEC C19\/22.2 (16A for EU, 20 A for USA) socket<\/p>\n
Protections<\/p>\n
Fully protected circuit design with:<\/p>\n
Ac protection: shut down power supply when AC mains voltage is outside the operating range
\n Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
\n DC protection: protects against infrasonic signal at the outputs
\n VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
\n Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
\n Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals, by reducing maximum output
\n Thermal protection: output stages operating temperature up to 80 \u00b0C (176 \u00b0F)
\n Temperature controlled continuous variable speed fan, front to back airflow
\n Temperature forecast with LCD traced historical behavior<\/p>\n
General<\/p>\n
Fixed frequency switchmode output stage for high grade sound accuracy
\n Compact size \u2013 all models only 1 RU for reduced rack cost and space
\n Light weight \u2013 for easier racking and shipping: 7 kg (15.4 lbs)
\n Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
\n Remotely switchable double input (main and aux) per channel<\/p>\n
Loudspeaker system configuration<\/p>\n
Direct drive either low impedance loads or 70V \/ 100V Hi-Z distributed lines
\n Switchable 35Hz \/ 70Hz high pass filter per channel
\n Mixed configuration with Lo-Z\/Hi-Z systems possible
\n Bridged mode low impedance per channel pair<\/p>\n
Alarms and GPI\/O<\/p>\n
NC\/NO contacts per channel for alarm notifications
\n Remote ON\/OFF switch
\n Remote VCA control per channel<\/p>\n
Digital Signal Processing<\/p>\n
TI C6000 DSP platform
\n AD\/DA converter: dual 24bit @ 48 kHz Tandem\u00ae architecture
\n Input\/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
\n Delay up to 100 ms for time alignment
\n Active DampingControl\u2122 for cable compensation
\n Peak, RMS voltage, RMS current, TruePower\u2122 limiters<\/p>\n
Remote Control & Monitoring<\/p>\n
Via software:<\/p>\n
Control and diagnostics monitoring via Armon\u00edaPlus
\n Dedicated WebApp<\/p>\n
Via Hardware:<\/p>\n
Attenuation (from 0dB to 26dB)
\n High-pass filters (35Hz, 70Hz)
\n Lo-Z\/Hi-Z\/70V\/100V output selection
\n Adjustable gain (from 26dB to 35 dB)<\/p>\n
Output power per Channel 1000 W @ 2 \u03a9, 800 W @ 4 \u03a9, 800 W @ 8 \u03a9
\nBridge mode 2000 W @ 4 \u03a9, 1600 W @ 8 \u03a9<\/p>\n","protected":false},"excerpt":{"rendered":"
Features
\nPower supply<\/p>\n
Powersoft legendary universal switch-mode power supply up to 400VAC tolerant with Power Factor Correction
\n Patented output filter with ripple cancellation network
\n Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
\n Detachable AC mains cable with IEC C19\/22.2 (16A for EU, 20 A for USA) socket<\/p>\n
Protections<\/p>\n
Fully protected circuit design with:<\/p>\n
Ac protection: shut down power supply when AC mains voltage is outside the operating range
\n Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
\n DC protection: protects against infrasonic signal at the outputs
\n VHF protections: protects the loudspeakers against non-audible, strong, non-musical high-frequency signals
\n Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
\n Long term limiter: protects the loudspeaker against steady long term RMS (non-audio) signals, by reducing maximum output
\n Thermal protection: output stages operating temperature up to 80 \u00b0C (176 \u00b0F)
\n Temperature controlled continuous variable speed fan, front to back airflow
\n Temperature forecast with LCD traced historical behavior<\/p>\n
General<\/p>\n
Fixed frequency switchmode output stage for high grade sound accuracy
\n Compact size \u2013 all models only 1 RU for reduced rack cost and space
\n Light weight \u2013 for easier racking and shipping: 7 kg (15.4 lbs)
\n Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
\n Remotely switchable double input (main and aux) per channel<\/p>\n
Loudspeaker system configuration<\/p>\n
Direct drive either low impedance loads or 70V \/ 100V Hi-Z distributed lines
\n Switchable 35Hz \/ 70Hz high pass filter per channel
\n Mixed configuration with Lo-Z\/Hi-Z systems possible
\n Bridged mode low impedance per channel pair<\/p>\n
Alarms and GPI\/O<\/p>\n
NC\/NO contacts per channel for alarm notifications
\n Remote ON\/OFF switch
\n Remote VCA control per channel<\/p>\n
Digital Signal Processing<\/p>\n
TI C6000 DSP platform
\n AD\/DA converter: dual 24bit @ 48 kHz Tandem\u00ae architecture
\n Input\/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
\n Delay up to 100 ms for time alignment
\n Active DampingControl\u2122 for cable compensation
\n Peak, RMS voltage, RMS current, TruePower\u2122 limiters<\/p>\n
Remote Control & Monitoring<\/p>\n
Via software:<\/p>\n
Control and diagnostics monitoring via Armon\u00edaPlus
\n Dedicated WebApp<\/p>\n
Via Hardware:<\/p>\n
Attenuation (from 0dB to 26dB)
\n High-pass filters (35Hz, 70Hz)
\n Lo-Z\/Hi-Z\/70V\/100V output selection
\n Adjustable gain (from 26dB to 35 dB)<\/p>\n
Output power per Channel 1000 W @ 2 \u03a9, 800 W @ 4 \u03a9, 800 W @ 8 \u03a9
\nBridge mode 2000 W @ 4 \u03a9, 1600 W @ 8 \u03a9<\/p>\n","protected":false},"featured_media":1172,"comment_status":"open","ping_status":"closed","template":"","meta":{"nf_dc_page":"","om_disable_all_campaigns":false},"product_brand":[],"product_cat":[22],"product_tag":[],"class_list":["post-1173","product","type-product","status-publish","has-post-thumbnail","product_cat-amplifiers","first","instock","shipping-taxable","product-type-simple"],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product\/1173","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/comments?post=1173"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/media\/1172"}],"wp:attachment":[{"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/media?parent=1173"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product_brand?post=1173"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product_cat?post=1173"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product_tag?post=1173"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}