Powersoft T604 DSP+Dante Digital Amplifier
\nThe T Series is a very flexible and cost effective amplifier platform loudspeaker processor.<\/p>\n
All models deliver the same high peak voltage allowing high SPL with single 8\/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.<\/p>\n
The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches\/repeaters\/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.<\/p>\n
Features
\nThe loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
\nFull control with a PC running Armon\u00eda. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
\nControl from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
\nWeb app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
\nGroup controllable advanced EQ with raised cosine filters
\nLarge preset library
\nPreset compatibility with X Series
\nVery long FIR filters (42.6 ms)
\nControl and monitoring through Armon\u00edaPlus
\nTechnical Data
\nNumber of channels: 4
\nOutput power: Single channel mode: 2 \u03a9: 1500W; 4 \u03a9: 1500W; 8 \u03a9: 1250W
\nOutput power: Bridge mode: 4 \u03a9: 3000W; 8 \u03a9: 3000W
\nPower supply: Universal, regulated switch mode
\nNominal power requirement: 100-240 V \u00b110%, 50-60 Hz
\nOperating voltage: 90 V \u2013 264 V
\nGain: 32dB
\nInput sensitivity: 2.57 Vrms
\nMax input level: 24 dBu
\nFrequency response: 20 Hz \u2013 20 kHz (\u00b10.5 dB) @ 1 W, 8 \u03a9
\nS\/N ratio: > 110 dB (20 Hz \u2013 20 kHz, A weighted)
\nCrosstalk separation: < -70 dB @ 1kHz
\nTHD+N: < 0.1% (typical < 0.5%)
\nIMD: < 0.1% (typical < 0.5%)
\nInput impedance: 20 k\u03a9 balanced
\nAD Converter: 24 Bit Tandem\u2122 @ 48 kHz 125 dB-A Dynamic Range \u2013 0.005% THD+N
\nDA Converter: 224 Bit Tandem\u2122 @ 48 kHz 125 dB-A Dynamic Range \u2013 0.003% THD+N
\nMemory\/presets: 256 MB (RAM) plus 512 MB flash for presets \/
\nInput equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi\/lo-shelving, all-pass, band-pass, band-stop, hi\/lo-pass
\nCrossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB\/oct to 48 dB\/oct (IIR)
\nDelay: 2 s (input) + 100 ms (output) for time alignment
\nLimiters: TruePower\u2122, RMS voltage, RMS current, Peak limiter
\nDamping control: Active DampingControl\u2122 and LiveImpedance\u2122 measurement
\nAC main: 1x IEC C20 connector \u2013 20 A max (region-specific power cord provided)
\nAudio signal input: 4x XLR \u2013 Signal input
\nLoudspeakers: 2x speakON \u2013 Neutrik NL4MD
\nNetwork\/data: 1x Rj45 socket \u2013 RS485 data connection (non-DSP version), 1x Rj45 socket \u2013 DANTE\u00ae
\nDimensions (L x H x W): 484\u00d744.5x405mm
\nWeight:7.5 kg<\/p>\n
Output power
\nSingle-channel mode
\n2 \u03a9 \u2013 1500 W
\n4 \u03a9\t\u2013 1500 W
\n8 \u03a9\t\u2013 1250 W
\nBridge mode
\n4 \u03a9 \u2013 3000W
\n8 \u03a9 \u2013 3000W<\/p>\n","protected":false},"excerpt":{"rendered":"
Powersoft T604 DSP+Dante Digital Amplifier
\nThe T Series is a very flexible and cost effective amplifier platform loudspeaker processor.<\/p>\n
All models deliver the same high peak voltage allowing high SPL with single 8\/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.<\/p>\n
The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches\/repeaters\/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.<\/p>\n
Features
\nThe loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
\nFull control with a PC running Armon\u00eda. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
\nControl from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
\nWeb app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
\nGroup controllable advanced EQ with raised cosine filters
\nLarge preset library
\nPreset compatibility with X Series
\nVery long FIR filters (42.6 ms)
\nControl and monitoring through Armon\u00edaPlus
\nTechnical Data
\nNumber of channels: 4
\nOutput power: Single channel mode: 2 \u03a9: 1500W; 4 \u03a9: 1500W; 8 \u03a9: 1250W
\nOutput power: Bridge mode: 4 \u03a9: 3000W; 8 \u03a9: 3000W
\nPower supply: Universal, regulated switch mode
\nNominal power requirement: 100-240 V \u00b110%, 50-60 Hz
\nOperating voltage: 90 V – 264 V
\nGain: 32dB
\nInput sensitivity: 2.57 Vrms
\nMax input level: 24 dBu
\nFrequency response: 20 Hz – 20 kHz (\u00b10.5 dB) @ 1 W, 8 \u03a9
\nS\/N ratio: > 110 dB (20 Hz – 20 kHz, A weighted)
\nCrosstalk separation: < -70 dB @ 1kHz
\nTHD+N: < 0.1% (typical < 0.5%)
\nIMD: < 0.1% (typical < 0.5%)
\nInput impedance: 20 k\u03a9 balanced
\nAD Converter: 24 Bit Tandem\u2122 @ 48 kHz 125 dB-A Dynamic Range – 0.005% THD+N
\nDA Converter: 224 Bit Tandem\u2122 @ 48 kHz 125 dB-A Dynamic Range – 0.003% THD+N
\nMemory\/presets: 256 MB (RAM) plus 512 MB flash for presets \/
\nInput equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi\/lo-shelving, all-pass, band-pass, band-stop, hi\/lo-pass
\nCrossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB\/oct to 48 dB\/oct (IIR)
\nDelay: 2 s (input) + 100 ms (output) for time alignment
\nLimiters: TruePower\u2122, RMS voltage, RMS current, Peak limiter
\nDamping control: Active DampingControl\u2122 and LiveImpedance\u2122 measurement
\nAC main: 1x IEC C20 connector – 20 A max (region-specific power cord provided)
\nAudio signal input: 4x XLR – Signal input
\nLoudspeakers: 2x speakON – Neutrik NL4MD
\nNetwork\/data: 1x Rj45 socket – RS485 data connection (non-DSP version), 1x Rj45 socket – DANTE\u00ae
\nDimensions (L x H x W): 484×44.5x405mm
\nWeight:7.5 kg<\/p>\n
Output power
\nSingle-channel mode
\n2 \u03a9 – 1500 W
\n4 \u03a9\t– 1500 W
\n8 \u03a9\t– 1250 W
\nBridge mode
\n4 \u03a9 – 3000W
\n8 \u03a9 – 3000W<\/p>\n","protected":false},"featured_media":698,"comment_status":"open","ping_status":"closed","template":"","meta":{"nf_dc_page":"","om_disable_all_campaigns":false},"product_brand":[],"product_cat":[22],"product_tag":[],"class_list":["post-699","product","type-product","status-publish","has-post-thumbnail","product_cat-amplifiers","first","instock","shipping-taxable","product-type-simple"],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product\/699","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/comments?post=699"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/media\/698"}],"wp:attachment":[{"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/media?parent=699"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product_brand?post=699"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product_cat?post=699"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/subsonic.ae\/shop\/wp-json\/wp\/v2\/product_tag?post=699"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}